Blank Box Seal
The Blank Box Seal is always stocked.
*Please allow 2 weeks to fill and ship your order. There is no cost for shipping the Box Seal within US-48.
Made of neoprene rubber, this wall plate gasket fills the gaps between the plate and the wall surface, and between the outlet box and the wall plate, reducing the amount of sound that travels between rooms.
Installing the Box Seal can improve STC outlet values by 7dB, allowing it attain STC-62 or higher.
Two key qualities make it possible: mass and resilience. The neoprene rubber is dense to block sound, but also resilient so it bounces back to dampen sound energy. Other gaskets and sticky putty pads are made of malleable clay which changes and holds shape due to applied pressure (and sound waves), and doesn’t block sound as effectively as neoprene.
The Box Seal has many benefits over products like sealants and putty pads, including:
- Lower priced than either putty pads or sealants.
- Ease of use in existing partitions. Putty pads require the wall to be partially demolished for installation in renovations.
- Inconspicuous yet easily verified. Wall plates must be removed to verify if sealants are in place; putty pads are unverifiable once the gypsum board is installed.
- Fire protective as certified by Underwriters’ Laboratories for single duplex outlets, even back-to-back.
- Simple installation that can be completed by maintenance staff with just a screwdriver.
- Cleaner and easier, with no messy, sticky clay or putty to deal with.
- Unlimited shelf life.
- Unaffected by heat or cold, as opposed to sealants that lose consistency.
- Less waste, with no half-used tubes of sealant or wrong size putty pads left over.
- Secure within the outlet box, as they can’t fall into the wall like a putty pad can.
- L.E.E.D. Credits available for using the Box Seal in schools and healthcare facilities.
To put the Box Seal’s effects into context, you can imagine a typical hotel room, which usually shares a wall with an adjacent room and has five recessed outlets on each side. Most hotel chains’ standards require a minimum STC-50 partition. However, with untreated outlets, the effective performance drops to STC-42.
Using a higher STC wall won’t fix the problem, as sound will still pass through the openings created by the outlet.
But simply installing Box Seal increases the performance of the wall by seven decibels.